Thursday, June 2, 2011

Top Menu Spec

  1. File
    1. New
    2. Open
    3. Open Recent
    4. Save
    5. Save As
    6. Import
    7. Export
    8. Print
    9. Plot
    10. Digitize
    11. sodaCAD Preferences
    12. Close
    13. Quit
  2. Edit
    1. Undo
    2. Redo
    3. Undo History
    4. Cut
    5. Copy
    6. Paste
    7. Duplicate
    8. Delete
    9. Select All
    10. Piece Properties
    11. Scale/Shrink
    12. Fabric/Stripes
  3. View
    1. Zoom
      1. Zoom In
      2. Zoom Out
      3. Zoom 1:1
      4. Zoom 1:2
      5. Zoom 2:1
      6. Selection
      7. Drawing
      8. Page
      9. Page Width
      10. Previous Zoom
      11. Next Zoom
      12. Zoom All
    2. Grid
    3. Guides
    4. Show/Hide
      1. Snap Controls
      2. Toolbars
      3. Toolbox
      4. Rulers
      5. Scroll bars
      6. Palette
      7. Status bar
    5. Fullscreen
    6. Piece list
    7. Piece properties
    8. Pop-up info
    9. Grading table
    10. Base size only
    11. Show seam
  4. Design
    1. Draft (draw)
      1. Round corner
      2. Align points
      3. Set points (0,0) coordinates
      4. Set start point
      5. Insert baseline in center of piece
    2. Rotate
      1. Rotate 90 degrees CW
      2. Rotate 90 degrees CCW
      3. Rotate piece, baseline, internals
      4. Rotate piece so baseline is horizontal
      5. Rotate so baseline is parallel to selected segment
      6. Custom
      7. Rotate segment
    3. Flip
      1. Horizontal
      2. Vertical
      3. Flip along selected
    4. Lock (piece)
    5. Seams
      1. Add/Remove
      2. Corners
      3. On/Off
    6. Walk
      1. Change direction
    7. Split
      1. Slice along internal
    8. Mirror
      1. Mirror along selected 2 pt. segment
      2. Fold in
      3. Fold out
    9. Create
      1. Join pieces
      2. Trace piece
    10. Pieces
      1. Remove Current
      2. Save current as new
      3. Replace selected
      4. Duplicate
    11. Measure
    12. Slash and Spread
    13. Points and Notches
      1. Add point on segment
      2. Add point next to segment
      3. Delete point
      4. Move point
      5. Add notch
    14. Move
      1. Piece
      2. Internal
      3. Move selected proportionally
      4. Move selected parallel
    15. Pleats
      1. Create box pleats
      2. Create knife pleats
    16. Buttons
      1. Insert drill holes
      2. Insert equidistant
    17. Text
    18. Darts
      1. Create
      2. Edit
      3. Open dart
      4. Open multi-dart
      5. Close dart
      6. Remove dart
      7. Copy dart
      8. Paste dart
      9. Rotate dart point
      10. Rotate around center
  5. Grading
    1. Sizes
    2. Stack Point
    3. Copy Grading
    4. Paste Grading
    5. Paste X
    6. Paste Y
    7. Paste Around
    8. Flip X Grading
    9. Flip Y Grading
    10. Equal X Grading
    11. Equal Y Grading
    12. Zero Grading
    13. Zero X
    14. Zero Y
    15. Graded Nest
    16. Grade Proportional
    17. Grade Relative
    18. Grade Rules
  6. Options
    1. Snap and select
    2. Draft setup
    3. Grid and stripes
    4. Colors and line types
    5. Fonts
    6. Working units
    7. Open move pt. dialog
    8. Auto reseam
    9. Auto update notch
    10. Lock piece
  7. Help
    1. Index
    2. Tutorials

No comments:

Post a Comment